CONCORD BASECOATER -36 MANDREL

Main design parameters
1. 36 mandrel rotary trip dual coating heads - rated at 2000+ cpm
2. Can sizes： 202-211 diameter (up to 610 length)
3. Speed：2,000 cpm

Main features
Individual mandrel trip - reset mechanism
Two applicator head design
7.5HP applicator drives with timing belts
Two laps per applicator
Disc transfer

Very efficient mechanical design
Upper and lower belt type pre-spin
Auto-grease
Viking type gear pump basecoat supply Viking

7.5 HP AC vector drives
HTD (high torque) timing belts HTD
belt sensor-monitor
Economic Operational Considerations
No special foundation required - saving of approx. $20,000/installation
Minimum spoilage - only one can lost with bad can blow-off - approx. savings $20,000/yr.

“High Flow” Air-vacuum design
7/16” air/vacuum passages throughout entire system 7/16”

Main features:
Viking type gear pump
bed plate mounted unit
AC Vector (variable speed) motor drive
CONCORD BASECOATER -24 MANDREL

Main design parameters
1.24 mandrel rotary trip dual coating heads - rated at 1800 cpm
2. Can sizes：202-211 diameter (up to 610 length)
3. Speed ：1,800 cpm